MG Chemicals 846-80G Carbon Conductive Grease, 80g Tube, Black

Product Information

Your main goal is to prevent oxidation and corrosion of contacts with damaged plating and Vaseline is as good as anything at that job.

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC).It lubricates, reduces contact resistance, repels moisture, prevents static buildup and it is a powerful corrosion inhibitor. In this case study we will focus on an Electronic Parking Brake (EPB) switch lubrication application; sometimes EPB devices are referred to as E-Brake. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. Note: Never use conductive grease on sliding switches, which could malfunction if a conductive grease is applied to the contacts. We use two types of silica as a thickener in our grease range, both fumed silica and hydrophobic silica.

is an economical carbon conductive grease that provides lubrication for electrical contacts, reduces contact resistance, repels moisture, inhibits corrosion, and prevents static buildup. To find out more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. It is non-conductive but works by excluding oxygen from the contact area, preventing oxidation and so, maintaining good connection. NyoGel® 758G is an excellent channeling bearing grease with a volume resistivity of approximately 300 ohm-cm. I also have small electronic devices that require me turning batteries a few times to start functioning.

It depends on what the seal is made from, certain kinds of lubricants will damage certain kinds of seal materials. HCG is a copper-filled, water resistant, non-melting grease, ideal for application where low electrical resistivity is required. Use 8481 when you want a lubricating grease that provides great electrical contact and extreme environmental protection. g. automotive), then using a conductive grease on electrical connectors should be ruled out as an option. Dielectric grease is used to seal out oxygen from the contact area to prevent corrosion, but shouldn't affect the conductivity of the connection because it's only displacing air, so what they said is correct.

The application of a conductive grease on an electrical connector in a volume production project would be considered a crazy decision, in the opinion of the article author. Conductive greases for electronics efficiently lubricate moving parts, offer superior protection against corrosion and help ensure electrical continuity between irregular surfaces. A custom-formulated, fluorinated conductive grease was recently developed by Nye for automotive battery lugs, to enhance conductivity over a wide temperature range. This electrical conductive grease utilizes an advanced silicone lubricant that is compatible with metal, rubber, and plastic. I've always just used whatever oil/grease was handy, usually Vaseline or automotive wheel bearing/chassis grease and never had any issues, up to and including lead acid car/truck batteries.They are ideal for surface-to-surface, fixed or sliding, contact areas requiring lubrication while maintaining electrical continuity. If the seal is silicone, then you likely do NOT want to use a silicone grease, because it contains solvents that make it grease instead of a lump of silicone can have the same effect on the silicone seal over time. Payment can be made online by debit/credit card or you can request a pro-forma invoice to pay by BACS.

It is excellent for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connecters and potentiometers. A conductive grease is never recommended to fix an electrical connector problem; a dielectric grease is always the best choice when choosing an electrical connector grease. It is excellent for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors and potentiometers.I found this interesting chart of specific manufacturer of lubricant materials and I wonder if it is universal or only specific to this manufacturer. If you are reading this because your connector has already failed or is failing intermittently, effective cleaning of the connector followed by an application of a quality dielectric electrical connector grease is the best solution. We use vasseline all the time on connectors to get a better signal, especially on non-gold plated contacts. Quote from: Boris_yo on January 14, 2022, 01:14:10 pm Asked about silicone dielectric grease that I saw being sold on.