2 Pack Epoxy Garage Floor Paint - 5 litres (Light Grey BS00A05)

Product Information

For greasy floors with heavy oil residue clean thoroughly using a suitable degreaser scraping off any dust or dirt and then prime with Resincoat Oil Tolerant Primer

Separating the mix can be done by either weight or by volume, but make sure you’re using the one consistent with the datasheet.If you think you may have gotten the ratios wrong then there are a few ways to figure it out by the issues you’re having with the finish. Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform. floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 2.5L tin can’t be used for 2 coats. It will cover 15m² with one coat, but if you have for example, 7.5m², you can’t use half the 2.5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin, so select two of these if you want to apply 2 coats to an area of up to 15m². If you have any questions please let us know.

As many of our customers are classic car owners or business, we though that you might be interested in this small business which offers top quality and authentically made number plates. I would wish to have a Matt finish or low sheen but not gloss. Thank you. I look forward to your guidance. If the parts aren’t mixed together properly then some parts of the surface won’t dry at all. Patches of it may dry, but there will be some bits that haven’t reacted. The only thing to do if this happens is unfortunately to start again. If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.

Customer reviews

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas. We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations After the products are mixed, and the chemical reaction has started, sometimes an exothermic reaction happens and the paint gets hot. But don’t worry, that’s perfectly normal. As long as the mixing itself was done slowly it’s all fine. The winner of our June #showusyourproject competition is a local flooring specialist, @purtfloor of Hartshill, Stoke-on-Trent. Usually the pot life is only a couple of hours, so make sure you are ready to do the work before you mix the components together.

Q: I’ve levelled my floor with Arden k301 which I chose because it is suitable for overpainting with resin paint.Q: I wish to repaint a concrete garage floor with 2 coat epoxy resin . It has previously been painted with Watco Epoxy Matt Coat. This is now 8 years old and soiled . The colour was light grey Matt finish. When mixing with a mechanical mixer you need to be sure that it is set at a low speed. It may be tempting to crank up the speed to try and mix it faster, but the heat that will be generated from mixing faster would cause issues further down the line. The heat affects the reaction between the base and activator, and has a detrimental impact on the curing.